HIP P8 OUTDOOR LED DISPLAYS

รหัสสินค้า :

LED DISPLAYS

HIP P8 OUTDOOR LED DISPLAYS จอ LED จอโฆษณา ประชาสัมพันธ์ แม้เปลี่ยนสื่อโฆษณากี่ครั้งก็ไม่มีค่าใช้จ่าย สำหรับธุรกิจ ป้ายโฆษณาดิจิทัล ที่เจ้าของธุรกิจไว้ใจ สำหรับใช้งาน ภายนอกอาคาร

  • The front LED Module must be coated to prevent water and moisture.
  • LED Module on the back must be coated with Silicone Conformal Coating to prevent corrosion of the copper wire of the electrical circuit (PCB Board).
  • LED Cabinet is square. Not less than 960 mm. x 960 mm. with a number of LED Modules arranged in a grid of not less than 18 Modules per one Cabinet.
  • Products are certifed to IS09001:2015, ISO45001:2018, CE, FCC

HIP Logo PDF

หมวดหมู่สินค้า :

แชร์ข้อมูล :

(ขอสงวนสิทธิ์ในการเปลี่ยนแปลงรายละเอียดโดยไม่ต้องแจ้งให้ทราบส่วงหน้า บริษัท เอช ไอ พี โกลบอล จำกัด)

Model P8
Pixel Pitch 8mm
Pixel Structure 1R1G1B
Pixel Density 15625/m2
Module Resolution 40(W)*20(H)
Box Size 1280*1280mm
Module Size 320*160mm*12.8mm
Single Point Luminance, Chromaticity Correction Have
White Balance Brightness ≥6000cd/m
Color Temperature 3200K-9300K adjustable
Horizontal Viewing Angle ≥160°
Vertical Viewing Angle ≥140°
Resolution ≥97 Pixel/cabinet
Colour 16.7 Million
Visible Distance ≥16 meters
Brightness Uniformity ≥97%
Contrast 3000:1
Signal Processing Bits 16 bits*3
Grayscale 16Bit
Control Distance Gigabit Ethernet cable: 100 meters,
Optical fber : 10 kilometers
Drive Mode High gray-scale constant current source
driver IC
Frame Rate ≥60HZ
Refresh Rate ≥1920HZ
Control Method Synchronize
Brightness Adjustment Range 0 to 100 stepless adjustment
Continuous Working Time ≥72 hours
Typical Life 50,000 hours
Protection  Class Front IP65, back IP43
Range Of Working Temperature -20 C° to 60 C°
Operating Humidity Range 10 %- 80% RH non-condensing
Storage Temperature Range -20 C° to 60 C°
Operating Voltage DC 5V
Power Requirements AC: 220x(1+10%)V, 50x(1+5%)Hz
Maximum Power Consumption 600W/m2
Average Power Consumption 300W/m2
  • It has an environmental protection level of not less than IP65 or better.
  • The material used to make the Display Module box is made of aluminum frame sprayed with black epoxy. resistant to corrosion and scratching, and has UV protection.
  • LED Chip arranged in a Matrix grid. The LED lamp can be used outside (Outdoor Type) wrapped with Optical Grade Epoxy, a type that prevents UV light, can be used outdoors. in high-temperature environments, and the LEDs used must come from the high-standard manufacturers currently in use. which must be certifed with at least the international standard IS09001 and must have a copy of the document showing the standard certification from the manufacturer
  • Properties of LED Lamp (Pixel Confguration) Each dot uses the principle of mixing lamp's color, including Red LED, Green LED and Blue LED.
  • The LED lamp used must be a Surface Mount Device (SMD) type.
  • The service life of LED lamps is not less than 10,000 hours at a temperature of +25C.
  • Operating temperature is good in the temperature range of -20 to +60 degrees Celsius.
  • LED Cabinet can display resolution (Resolution) not less than 96 Pixel (dot) in the long and high sides per 1 Cabinet.
  • The maximum number of colors that can be displayed is not less than 16.7 million colors.
  • Has a brightness level of not less than 6000 NIT (brightness per square meter) can be seen clearly.
  • Have a horizontal view of not less than 160 degrees and vertical not less than 140 degrees.
  • Have a clear vision distance in the minimum feld of view of 10 meters
  • It can be used with AC220 Volt voltage and the power supply is Switching Power Supply Output.
  • Has a maximum power consumption rate of not more than 600W/Sqm (Watts/Sq.m.) and an average power consumption rate of 300W/Sqm.

Reviews

There are no reviews yet.

Be the first to review “HIP P8 OUTDOOR LED DISPLAYS”

Your email address will not be published. Required fields are marked *